Ultra-Hot Power Washing

Commercial Grade Power Washing. Huge heated power washing equipment used for several large industrial projects is now available to dissolve dirt and grime for you! On Site Professional Cleaning is pleased to offer you ultra-hot pressure washing.

On Site technicians steam cleaned over 3 million sq. ft. of muddy timbers (summer 2008)

Why HOT Water? Simply put, hot water cleans better.

• For every 18 degree temperature increase over 150°F, cleaning effectiveness doubles.
• More heat means less cleaning products are needed to produce a good result.
• No residues are left behind. Cleaned items stay cleaner longer.
• Less cleaning products means little or no impact on vegitation or animals.
• Hotter water means less pressure is necessary to do the cleaning.
• Greasy, gummy materials can be removed much faster.
• Diesel motors are fuel stingy and use half the fuel regular gas units use.

Heated power washing can brighten your day nicely!

On Site's Pressure Washers Have Massive Water Flow and Pressure.

5,000 PSI (pounds per square inch) at 5 gallons per minute means our pressure washers put a tremendous amount of cleaning power to any surface. In fact, with all that pressure and heat, we can almost strip the paint off your car if you want (of course we won't!) and these units can just as easily be "tuned down" to lightly power wash around delicate items such as your flower beds and siding on your building without causing damage*.

   
Whether you need power washing at home or for an industrial project, On Site can get it cleaned right!

Common Applications

• Exterior building cleaning. Gutters, siding, doors, windows.
• Heavily soiled equipment - Trucks, tractors, loaders, dump trucks, graders, etc.
• Driveways and commercial property - Oil removal, gum removal, concrete, and stone cleaning.
• Industrial equipment and property - Prep for painting.
• Yard washing - Loosens thatch and pushes rocks and twigs to the perimeter of a yard.

Pressure Washing Estimates

Heated pressure washing is done on a per bid basis. Demonstration and approval must be completed prior to work commencement. The owner or authorized agent must qualify the expected results and sign a pre-existing condition waiver against damages that may be exposed with pressure washing.

*NOTICE: High pressure washing may remove loose surface materials such as caulking, loose sealants, paint particles, or loose substrates. All care and due diligence will be exercised to protect your property during the washing process, but it we offer no assurance or guarantees with regards to the condition of materials after cleaning. In the event that particulate is disbursed throughout the cleaning area, cleanup of this debris is considered an additional project and will be billed separately. Repairs to surfaces affected by cleaning shall be the sole responsibility of the owner.